background image

GENERAL BEST PRACTICES FOR ASSEMBLY:

Read all instructions before starting                                                                                                                                                                                                       

Clear a flat covered space to begin assembly                                                                                                                                                                                                                                   

 Always best to do it with a friend                                                                                                                                                                                                             

Note that hardware required is provided for every step                                                                                                                                                                       

Pay attention to orientation                                                                                                                                                                                                                

Number of the hardware corresponds to its letter in the package                                                                                                                                                    

Helpful hints provided along the way

WARNINGS:

Use the correct screws as indicated. All screws should be hand tightened until the complete piece is 

assembled ( This will make the assembly process much easier ). Once the piece is fully assembled, then go 

back and tighten all screws with provided tool.

Keep all children and pets away from assembly area. Children and pets should be supervised when they are in the area of the 

product construction.

Keep assembly area at least 6 feet from any obstruction such as a fence, garage, house, overhanging branches, laundry line or 

electrical wires.

Some parts may contain sharp edges. When assembling and using this product, basic safety precautions should always be followed 

to reduce the risk of personal injury and damage to the product. Please read all instructions before assembly and use.

The sofa and ottomans are not to be used for standing purposes and will not function as a stool or step-ladder. Use on even 

surfaces only.

The sofa is used at weight of 600lb (270kg), the ottoman is used at weight of 250lb(113kg). Improper use of 

the products or failure to use as directed may result in injury. Not intended for commercial use.

MAINTENANCE 

STAIN RESISTANT CUSHIONS CARE —— KEEP THE CUSHIONS IN STORAGE ON RAINY DAYS.      

SPILLS: 

Immediately wipe up the spill using a white damp cloth. Repeat process if necessary until stain is gone.                                                           

Allow cushions to air dry.                         

FABRIC CARE:

 Hand wash cold, non-chlorine bleach when needed, lay flat to dry. Cool iron if necessary. Do not dry clean.

ALL WEATHER WICKER PRODUCT CARE 

Before using, clean the product completely with a soft dry towel. When not in use, wipe free of any dirt or loose objects, wash with a 

mild solution of soap and water, rinse thoroughly and dry completely. Do not use strong detergent or abrasive cleaners. Screws can 

be loosen over a peirod of usage, please check the screws occasionally and re-tighten if necessary.

Summary of Contents for ROCKBRIDGE GBO22-019-2









Reviews: