PAGE 1 OF 4
Table is not to be used as a seating surface. Improper use of this product or failure to use may result in injury.
Read all instructions before starting
Clear a flat covered space to begin assembly
Always best to do it with a friend
Note that hardware required is provided for every step
Pay attention to orientation
Letter of the part corresponds to a sticker on the product
Number of the hardware corresponds to its letter in the package
Helpful hints provided along the way
MAINTENANCE:
WARNINGS:
GENERAL BEST PRACTICES FOR ASSEMBLY:
Retain these assembly instructions for future reference.
Regularly check hardware and tighten if necessary
Wash frame parts with mild soap and water, rinse thoroughly, and dry completely. Do not use bleach, acid, or
other solvents on the frame parts.
Inspect and tighten all bolts and fasteners on a regular basis to ensure the proper performance and safety of
your table.
When moving the table, remove the umbrella and lift. Do not drag this table.
We recommend the use of furniture covers when not in use.
In order to prolong the life and beauty of your table, we recommend that it be stored in a dry and protected area
during off season periods.
The umbrella should be lowered and/or removed in windy conditions.
Use the correct bolts as indicated. Do not tighten any of the bolts until the table is completely assembled.
Do not sit or stand on this table.
A weighted umbrella base must be used when using an umbrella with this table.
Do not discard of any of the packaging until you have checked that you have all of the parts and fittings required.
Keep children away during assembly. This item contains small parts that can be swallowed by children.
Children should always be under direct adult supervision while using this product.
