STEP 5
Turn over the assembled chair bucket and secure the swing arms on
U-shaped fitting (D) to the bottom tube of left arm (A1) and right arm
(A2) with 4 screws (J), and 4 nuts (H) with allen wrench (K) and
wrench (L).
NOTE: PLEASE FIX TWO SCREWS IN DIAGONAL POSITION TO KEEP
THE BALANCE THEN FIX THE OTHER TWO SCREWS.
STEP 6
Push the top plate on the base (E) with different position to make the
A2
A1
C
B
D
Push the top plate on the base (E) with different position to make the
holes open for ready assembling. Connect the 4 screws (J) through
the holes of the plate on the base (E) and the holes on the tube of U-
shaped fitting (D) with 8 washers (G) , 4 spring washers (F) and 4 Nuts
(H) by using allen wrench (K) and open end wrench (L) .
NOTE: THIS STEP IS VERY IMPORTANT. DO READ THE
INSTRUCTION AND DIAGRAM CAREFULLY.
J
G
G
H
D
E
F
