1
1
2
2
10
10
10
10
2 x 2
Page 5 of 8
HOW TO INSTALL THE CAM BOLT AND CAM LOCK
a
b
c
1
1 x 2
HELPFUL HINTS
•
A Phillips Screwdriver and a flat head screwdriver will be needed for assembly and are not provided.
•
Separate all parts before starting.
10 x 4
Important:
Press a
nut into the hole
in the pa
r
t
,
making su
re
the “-“ patt
ern
is f
acing up.
!
Important:
Using a st
andard screw
driver,
turn the nut until the “-” is
inline with the hole for the bolt.
!
HOW TO INSTALL NUTS
H
H
H
2
G
G
1. Insert Cam Bolt (1) into Bottom Trim Panel (G),
fully tighten.
2. Align the Cam Bolts (1) in Bottom Trim Panel (G)
with the holes in the edge of Bottom Panel (H)
and slide into place.
3. Secure the Panels together using Cam Lock (2).
Insert Nut (10) into the holes of Bottom Panel (H).
TIP:
The line on top of Nut (10) must be in line with the bolt.
