12
1
1
The trim is pre-assembled from the
factory with an optional bottom trim. If
the firebox will be installed in an elevated
location, the bottom trim will be required.
If the firebox will be installed on the floor,
remove the bottom trim. To remove the
bottom trim remove eight (8) screws as
shown.
2
2
Prior to installing the trim, remove
inner decorative panels from the
fireplace by tilting the top inwards,
then pull up and out.
Summary of Contents for EVO EVO750TRIM-AU
