1. Lay the Fireplace (A) upside down on a padded surface with the underside
accessible. Attach each Leg (B) to the fireplace by inserting the tab on the top of
each Leg (B) into the corresponding slot on the bottom of the Fireplace (A). Insert
two Screws (C) into predrilled holes and tighten securely for each Leg (B).
2. Turn the fireplace (A) upright so that it is standing on all four legs. Align the rear
part of the chimney (E) so that it slides under the lip of the disk attached to the
top of fireplace (A).
ASSEMBLY INSTRUCTIONS
Do not install the fireplace on shelves, raised platforms, beds, blankets, pillows etc. Keep combustible materials such as furniture, bedding,
papers, clothes and curtains at least 3 ft. (914 mm) from the fireplace.
The fireplace is heavy and should be assembled near
its desired location.
It is recommended that two people move the
assembled fireplace to prevent injury.
The fireplace should be located in an area:
Out of direct sunlight.
Not susceptible to moisture.
Away from uninsulated outside wall.
E
Installation
B
A
C
C
B
TAB
