Real-El STAB-500 M Operation Manual Download Page 3

Technical support: www.real-el.com

ENG

STAB-500 M

2

Operation Manual

3. SAFETY PRECAUTIONS

Before using this device, please read the safety rules carefully:

Ϝ

It is strongly forbidden to open the cover of the device, there is high voltage inside. If some 

problems occur, please read the operation manual carefully and address an authorized service 

center. For the list of authorized service centers please go to 

www.real-el.com

.

Ϝ

Do not let liquid get inside the device, it can cause short circuit or electric shock. 

Ϝ

In case there are signs of improper operation of the device (sparkling, unusual smells, etc.), 

unplug the device from the mains immediately and address your nearest authorized service 

center.

Ϝ

It is forbidden to connect the automatic voltage regulator to devices with power consumption 

higher than its maximum output power. It can cause breakdown of the device.

Ϝ

This device is not intended for use by persons (including children) with reduced physical, 

mental capabilities, lack of experience or knowledge; use of the device by such persons is 

permitted only under the condition of supervision or instructions for the use of household 

appliances by persons responsible for their safety.

Ϝ

Children should be supervised by authorized personnel to exclude their playing with the 

appliance.

Ϝ

Do not use the appliance with a damaged power cord or plug, or after handling liquids, falling 

or any other damage. To avoid electric shock, do not attempt to disassemble or repair the 

appliance yourself. If necessary, contact a specialized service center.

It is strongly forbidden to operate the device in the following conditions:

 

LQGXVW\HQYLURQPHQWRUHQYLURQPHQWFRQWDLQLQJKLJKO\LQԜDPPDEOHJDV

 

at temperature higher than 40 °C or lower than 0 °C;

 

at humidity level higher than 90 %;

 

in direct sunlight or next to heating elements;

 

in vibration areas;

 

outdoors.

Ϝ

,QFDVHRIԛUHXVHRQO\SRZGHUԛUHH[WLQJXLVKHUDVZDWHUFDQFDXVHHOHFWULFVKRFN

Ϝ

The automatic voltage regulator should be installed in proximity to power supply, then it will be 

easier to unplug the device if necessary.

4. PACKAGE CONTENTS

Ϝ

Automatic voltage regulator – 1 pc

Ϝ

 Operation Manual – 1 pc

Ϝ

 Warranty card – 1 pc

Caution! There is high voltage inside on the insulation elements which can 

result in electric shock.

STAB-500 M

Summary of Contents for STAB-500 M








Reviews: