ENG
Technical support: www.real-el.com
6
M-590
Operation Manual
* You might have to enter “0000” code to connect some models via Bluetooth.
** If an item has been already registered in the device list of sources, then the second search mode activation is
not needed. Choose only the item name and the “connect” command on the source.
Bluetooth mode
•
Select the Bluetooth mode using SOURCE button
a
on the front panel of the subwoofer or
SOURCE button
b
on the remote control. After 2-3 seconds the speaker system starts the
search mode.
•
Activate Bluetooth search mode of your device (phone, notebook, smartphone, etc.). “M-590”
will be displayed which should be connected to*.
•
Indicator light continuously when connection is successful. If there is no connection, indicator
will blink. In this case the system should be switched over to the search mode once again (turn o
ff
and turn on Bluetooth mode)**.
FM Mode
•
Use SOURCE button
a
on the front panel of the subwoofer or SOURCE button
b
on the
remote control to enter the Tuner mode.
•
Press and hold MEMORY
j
on the remote control to auto scan the stations.
•
If preset radio stations are available in the memory, you can switch from one to another by short
pressing buttons
g
and
h
on the front panel of the subwoofer or buttons
f
and
m
on the
remote control. You can also enter the frequency or the number of the preset station using
numeric pad buttons
g
on the remote control.
“Line input” Mode (AUX or DVD)
•
Press SOURCE button
a
on the front panel of the subwoofer or SOURCE button
b
on the
remote control to switch to the AUX or DVD mode. The display will show AUX or DVD inscription.
MUTE Mode
•
To enter the MUTE mode, press button
h
on the remote control. To quit the MUTE mode
press the button
h
repeatedly or press one of the buttons VOL +/-
e
on the remote control
Note. Due to the constant development of the software, the actual MSS operation may di
ff
er from described in
this Manual. The most recent version of the Manual is available at www.real-el.com