ENG
User’s manual
GD-840/GD-850/GD-855
Technical support: www.real-el.com
3
Pairing
•
To transmit a signal via Bluetooth it is necessary to connect the device
with a signal source (see connection diagram in Fig. 2). For this purpose
turn on the headphone and not releasing button
d
wait for the search
mode to be activated – LED indicator
f
indicates blue and red alternate.
•
Select the search mode on a signal source (cell phone, tablet, laptop
etc.). «GD-850» will be displayed on the devicelist, need to choose it and
make connection*.
•
When connection is successful, there will be vocal signal. If no device
connected, the earphones will be turned o
ff
automatically in 10 minutes. To
interface devices, the earphones should be turned on again to the search
mode**.
•
LED indicator on the earphones blinks blue and red during the data
exchange with a device connected via Bluetooth.
* You might have to enter “0000” code to connect some models of devices via
Bluetooth.
** If the item has been already registered in the device list of a source, then the
second search mode activation is not needed. Choose only the item name and the
“connect” command on the source.
