www.ReadyLIFT.com - Phone: (800) 549-4620
Installation Instructions 69-2300 / 2301 / 2302 / 2303
8
7-20-16 MMC
Plac e your mes sage here. F or maximum i mpact, us e t wo or thr ee sent ences.
Final Checks & Adjustments
Post Installation Warnings:
Once the vehicle is lowered to the ground, check all parts which
have rubber or urethane components to insure proper torque. Torque wheels to factory specs.
Move vehicle backwards and forwards a short distance to allow suspension components to ad-
just. Turn the front wheels completely left then right and verify adequate tire, wheel, brake
line, and ABS wire clearance. Test and inspect steering, brake and suspension components for
tightness and proper operation. Inspect brakes hoses and ABS lines for adequate slack at full
extension.
***FAILURE TO PERFORM THE POST INSPECTION CHECKS MAY RESULT IN VEHI-
CLE COMPONENT DAMAGE AND/OR PERSONAL INJURY OR DEATH TO THE
DRIVER AND/OR OTHERS***
Vehicle Handling Warning:
Vehicles with larger tires and wheels will handle differently than
stock vehicles. Take time to familiarize yourself with the handling of your vehicle.
Wheel Alignment/Headlamp Adjustment:
It is necessary to have a proper and professional wheel alignment performed by a certi-
fied alignment technician. Align the vehicle to factory specifications. It is recommended
that your vehicle alignment be checked after any off-road driving. In addition to your ve-
hicle alignment, for your safety and others, it is necessary to check and adjust your vehi-
cle headlamps for proper aim and alignment
Vehicle Re-Torque and Safety Inspection:
Upon completion of all services and adjustments performed on your vehicle, and within 50
miles of driving, check to ensure all fasteners and hardware are properly torqued to specifica-
tion as noted in the vehicles factory service manual or the torque chart included.
***RECHECK ALL HARDWARE FOR PROPER TORQUE VALUES AFTER 500 MILES,
AND THEN PERIODICALLY AT THE EACH SERVICE INTERVAL THERAFTER.***
Recommended Alignment Specs
Camber
-0.3
-0.3
Tolerance
+/- 0.5
Caster
+3.0
+3.0
Tolerance
+/- 0.5
Toe
+.10
+.10
Total
+.20