ReadiVac EAZE, Instruction Manual, Page: 18 / 45

P18
En
CLEANING AND MAINTENANCE
Please observe the following instructions to clean the vacuum cleaner regularly
to maintain its best performance. Before you start cleaning, you must turn off the
power and unplug the charger cord.
Main Body Maintenance
• Please use a dry soft cloth to wipe off the dirt on the machine body.
• If the dirt is difficult to remove, diluted neutral detergent can be placed on the
cloth. Wipe off the dirt with a soft damp cloth.
• Please do not use any chemical thinner, benzene, spray including abrasives etc.
to clean the unit.
Nozzle and Dust Container Maintenance
• Please clean the parts with a dry soft cloth.
• Dispose of the accumulated dust in the Dust Container regularly. Wash the
Dust Container with warm water. NEVER wash the Floor Nozzle in water.
• After washing, carefully use a soft cloth to dry the parts. Please ensure that
the parts are completely dry before attaching them back into the main body.
Filter and Dust Container Maintenance
• Remove Outer Filter from the Dust Container. Remove pleated EPA Filter
from the Outer Filter.
• Push the two protrusions of EPA Filter inwards and pull the EPA Filter out.
Seal Ring
Outer Filter
Dust
Container
Using a small, soft bristled paint brush, carefully sweep
all surface debris/dust from Outer Filter screen and
pleated surface of EPA Filter until clean.
Periodic washing of both Filters is required to remove
fine surface dust. Carefully rinse filters in water. Ensure
all parts are completely dry before reassembly.
Do Not use a “stiff” brush to clean the surface of the Outer or EPA
Pleated Filter. This action may cause damage to the filters.
Never machine wash or dry the Outer Filter and/or EPA Filter.
CAUTION!