REACH ENC110 SD Encoder
User Manual
Copyright© Shenzhen Reach IT Co., Ltd.
10
/
12
2.6.2 Change password
Enter the old password, and then enter the new password, and click “save”.
2.6.3 Upgrade system
(1) Prepare the upgrade package;
(2) Click “browse” to locate the upgrade package file;
(3) Click “upload”;
(4) When the upgrade is completed, the encoder will restart automatically. You
can view the “system information” to check whether the system upgrade is
successful or not.
Note: The upgrade takes about 3 minutes. Do not perform any other operation
during this period. When the upgrade process is finished, the system will
restart automatically. The system upgrade is completed after restart.
2.6.4 Change encoder IP address
