4
3 Operation
In the unlikely event of battery acid leakage and if you get it in your eyes or on your skin:
Rinse thoroughly with lots of water and contact your local healthcare for further consultation.
3.1 Before first use
Before using the RPP10 for the first time, you should charge the battery for 24 hours. This to ensure full
charge and to prolong the lifetime of the battery.
To charge the battery the first time, do the following:
1. Connect the RPP10 to a control box, see section 3.2.
2. Connect the battery charger to the RPP10 charger jack and to a wall socket.
3. Check that the LED on the charger is red, indicating charging.
4. Keep the charger connected for 24 hours.
3.2 Connecting the control box
You connect the control box to the VPI connector on the RPP10. For the RCB11, a VPI cable is needed.
The RCB12 control box has a fixed VPI cable
The VPI connector is keyed and must be inserted according to the image below. Make sure the part of the
connector that forms a straight line is facing the straight line on the RPP10 connector.
To connect the control box to the RPP10, do the following:
1. RCB11: Connect the VPI cable to the VPI connector on the control box.
2. Connect the VPI cable to the VPI connector on the RPP10.
Inserting the VPI connector the wrong way can cause damage the product.
