REA ScanCheck 3n User Manual Download

Page: 25 / 116

Operating Manual

Page 25 / 116

REA ScanCheck 3n

V 1.2.0 24/02/2020

REA

VERIFIER

3.4.3 Changing data output parameters

Back to the sub-menu for the settings.

The sub-menu for the settings is opened.
With

<4 Device configuration>

, a further sub-

menu appears for “Device configuration” in which

basic settings can be implemented.

Please refer to chapter 5.6.1.3.4.2 Device configure <2> Output parameters for details.

3.5

Operating REA ScanCheck 3n with report printer

The REA ScanCheck 3n verifier can be used as a mobile device, also together with the mobile
report printer of type

REA TD-GPT-U

Using the connection cable supplied, the printer is first connected via the mini USB socket and then
with the USB connector type A to the USB socket on the bottom front face of the REA
ScanCheck 3n.

Summary of Contents for ScanCheck 3n





















































































































Search results

Summary of Contents for ScanCheck 3n

Reviews:

Related manuals for ScanCheck 3n

Brands by name

Popular brands

REA ScanCheck 3n, User Manual

Search results

Summary of Contents for ScanCheck 3n

Reviews:

Related manuals for ScanCheck 3n

Brands by name

Popular brands