RDX QuickStation 4, Product Manual

Page: 87 / 116

O
CTOBER
2015 RDX Q
UIK
S
TATION
4
77
Ejecting RDX Media
You can eject an RDX media from the Remote Management Console. However, with
removable disk configurations, unless you first enable the Unsafe Eject option (see
page 48 ), you cannot use the physical eject button on the RDX QuikStation 4 to eject
RDX media that is connected to a host computer.
To eject RDX media:
1. From the Physical Device interface, select the dock where the RDX media is
located.
2. Click [Eject].
Note: If the RDX media selected is part of an active logical volume, the
following warning will appear. Tandberg Data does not recommend
ejecting RDX media that is part of an active logical volume.
The RDX QuikStation ejects the RDX media. The dock displays “Empty” in the
tree view.
!
Important
Make sure that you do not have any backup jobs in progress before
you eject RDX media from the Remote Management Console.