RDX QuickStation 4, Product Manual

Page: 58 / 116

48
P
RODUCT
M
ANUAL
1021829
C
HAPTER
4—S
YSTEM
C
ONFIGURATION
Setting Removable Disk Options
Note: The removable disk option only applies to disk configurations.
You can enable the “Unsafe Eject” mode for RDX media that have an established host
connection.
By default, when an RDX dock is configured as a logical disk drive that is connected
to a host computer, you cannot manually eject the media using the RDX dock eject
button or the eject function in the Remote Management Console. This is because the
connected host computer's operating system has reserved the RDX media.
A fixed disk operation mode can also be used for Windows backup support.
Enabling the unsafe eject option allows you to override the default and manually eject
an RDX media. This option is not recommended because you could potentially lose
data on the RDX media if you use unsafe eject. We recommend that you eject the
RDX media from your backup software application or from the host computer's eject
function.
To enable Unsafe Eject:
1. Click the Removable Disk tab from the Options dialog window.
2. Select the “Enable Unsafe Eject” checkbox.
3. Click [OK].
Caution
When using this operation mode, do not eject any RDX media while data is being written or
read as it might cause data loss.