Rduch AMWL-9DSP4/400, Instructions Manual

Page: 5 / 20

ESA on
- 12dB
0dB
27.1 C dB
AMWL
DSP-4
- 6dB
11:39
Preset 1
3dB
WEEK FEW PEOPLE
4.
Amplifier's menu control.
After amplifier's connection to 230V currency by a given cable and power input (switch no 12), (no 15) on the display,
Our company's logo appears, and after several seconds, there is a given screen.
eliminator pluged in
input indicators (1-4)
power terminal temperature
To service the menu, use the pulser handwheel (8) - press it, to get in the settings mode. Then, there is the next screen
“noise gate”
Turning the handwheel(8) left or right, there are other menu's parts ( previous or next parts). To come into the chosen
part press handwheel ( 8 ) (ENTER). To come back to the previous part press ( EXIT) ( 9 ).
5
clock
adjusted preset number
preset name
IN 2
IN 1 NG LIM1 EQ IN
CR
LIM2
Noise gate
c.d. Preset name
0dB
0dB
dB
±
Threshold
-90 dB
Noise gate Preset 1
white field - cursor present position
NG-Noise Gate
limiter on input 1
input equalizer
crossover
Turning the handwheel (8) left or right, the value edge of the noise gate can be adjusted from -24dB to -90dB.
Another setting part is the limiter field where, the value edge can be adjusted from -30dB to +6dB and the time of the
attack: slow, medium or fast. The same can be done for the limiter no2 -
LIM2 .
6dB
6dB
dB
±
Threshold
6 dB
Limiter 1 Preset 1
Attack time
Slow
IN 2
IN 1 NG LIM1 EQ IN
CR
LIM2
Noise gate
ENTER
IN 2
IN 1 NG LIM1 EQ IN
CR
LIM2
Limiter 1
ENTER
limiter on input 2
The first setting part is NG - noise gate