RDMOTO CZECH REPUBLIC
www.rdmoto.cz
2
Instructions:
1.
Remove fairing of motorcycle.
2.
Place the clamp spacer ID.2 and ID.4.
3.
Place the appropriate threaded clamps ID.3 and ID.5 around the frame and secure
using the M6x35 bolts ID.6.
4.
Bolt ID.9 insert through the dural. holder ID.8 and dural. spacer ID.7.
5.
This kit assembly into the threaded hole in the mounting plate ID.1 and tighten
ensuring.
6.
Slider position must be as shown on the picture.
7.
Place slider and tighten it by bolts ID.10 and washers ID.11.
Warning
–
we recommend to use safety glue on threads of all bolts (moderate
strong
–
blue colour).