RDMOTO KTM5S, Quick Start Manual, Page: 2 / 2

RDMOTO CZECH REPUBLIC
info@rdmoto.cz
www.rdmoto.cz
2
Instruction to assembly left hand side:
1. Remove the fairing original bolts M8.
2. Place the clamp spacer ID.2 and ID.4.
3. Place the appropriate threaded clamps ID.3 and ID.5 around the frame and secure
using the M6x35 bolts ID.6.
4. Bolt ID.9 insert into the dural. spacer ID.8.
5. This kit assembly into the threaded hole in the mounting plate ID.1 and tighten
ensuring.
6. Slider position must be as shown on the picture.
7. Place slider and tighten it by bolts ID.7. Insert aluminum cover and tighten it by bolts
ID.10.
Instruction to assembly right hand side:
1. Remove the fairing original bolts M8.
2. Place the clamp spacer ID.2 and ID.4.
3. Place the appropriate threaded clamps ID.3 and ID.5 around the frame and secure
using the M6x35 bolts ID.6.
4. Bolt ID.9 insert into the dural. spacer ID.8.
5. This kit assembly into the threaded hole in the mounting plate ID.1 and tighten
ensuring.
6. Slider position must be as shown on the picture.
7. Place slider and tighten it by bolts ID.7. Insert aluminum cover and tighten it by bolts
ID.10.
8.
Warning
–
we recommend to use safety glue on threads of all bolts (moderate
strong
–
blue colour).