SIGNAL PRESENT
The green LED glows when audio is present at the input. The indication is not affected by the setting of the mixer level control.
INPUT LEVEL
Adjust level control for the desired output level with the remote control (if used) set to normal operating position.
POWER INDICATOR
Glows dimly when unit is powered in
standby (sleep) mode; glows bright when
amplifier is on; flashes during power-up.
POWER BUTTON
Momentary pushbutton toggles the
amplifier between ON and STANDBY.
TONE CONTROLS
Adjust BASS and TREBLE as desired.
COMPRESSION INDICATOR
LED flashes when audio compressor is
acting on the amplified audio.
RDL
•
659 6th Street
•
Prescott, AZ
•
USA 86301
•
Sales: 800-281-2683
•
928-443-9391
•
Tech Support: 800-933-1780
•
928-778-3554
•
RDL Europe Sales & Support: (31) 20-6238-983
•
www.rdlnet.com
Copyright © 2011 Radio Design Labs, Inc. RDL, Radio Design Labs and the RDL logo are registered trademarks of Radio Design Labs, Inc. Data reflects product at publication time, subject to change without notice. “Made in USA” applies to all HD products except power supplies. Other trademarks, if any, are the property of their respective owners.
891-3360A
OUTPUT CONNECTIONS
IMPEDANCE SWITCH
Set to 8 Ohms (switch out)
IMPEDANCE SWITCH
Set to 8 Ohms (switch out)
IMPEDANCE SWITCH
Set to 4 Ohms (switch in)
Single 8 Ohm speaker
Single 4 Ohm speaker
Two 8 Ohm speakers
Two 4 Ohm
speakers
IMPEDANCE SWITCH
Set to 4 Ohms (switch in)
OUTPUT CONNECTIONS
