POWER CONNECTION
FIXED MOUNTING
RUBBER FEET ATTACHMENT
Insert Power Plug
Bottom View
of chassis
Recess
Screw
directly to flat
surface without
installing rubber feet.
Rotate 1/4-turn
clockwise to lock
Rotate 1/4-turn
counter-clockwise
to unlock
Peel backing and stick the 4 rubber
feet to chassis in recesses provided.
24 VDC INPUT
Insert plug from
power supply.
Rotate 1/4 turn
clockwise to lock.
MONITOR OUTPUTS
Connect to the video inputs of
1, 2 or 3 monitors or projectors.
VIDEO INPUT 1
Connect the primary video source to INPUT 1.
ID BITS
(separate switch provided for each input)
Set to NORM OFF position (button OUT) unless computer video
output fails to operate with the connected monitors; set switch
to ON position (button IN) if needed to activate computer video
monitor output (not typically required unless using certain laptops).
INPUT SELECTOR
Select INPUT 1 (button IN) or
INPUT 2 (button OUT) to feed
the rear-panel OUTPUT jacks.
VIDEO INPUT 2
Connect the secondary video
source to INPUT 2.
LOCAL MONITOR OUTPUT
Connect the LOCAL MONITOR
output to the input of the local
computer video monitor.
SYNC INPUT SELECTOR
The SYNC switch selects between standard computer card TTL sync
and RGBHV 75 ohm video format sync. Set the switch to the NORM TTL
position (button OUT) for use with normal computer video sources; set to
the VIDEO 75 OHM position (button IN) for use with 75 ohm sync sources.
POWER INDICATOR
Glows blue when the
product is connected to
a valid power source.
GAIN ADJUSTMENT
If long video cables are connected to the
outputs, turn the GAIN control clockwise
until the picture brightness appears normal.
If short output cables are connected, or if
the picture brightness is normal, set the
GAIN control fully counter-clockwise.
FOR BEST PICTURE QUALITY, REMOTE VIDEO MONITOR “OPTIMIZATION” FUNCTION SHOULD BE RUN, IF PROVIDED.
EQUALIZATION ADJUSTMENT
If long video cables are connected to the outputs, turn the EQ
control clockwise until the picture sharpness appears normal.
If short output cables are connected, or if the picture clarity is
normal, set the EQ control fully counter-clockwise.
POWER CONNECTION
FIXED MOUNTING
RUBBER FEET ATTACHMENT
Insert Power Plug
Bottom View
of chassis
Recess
Screw
directly to flat
surface without
installing rubber feet.
Rotate 1/4-turn
clockwise to lock.
Rotate 1/4-turn
counter-clockwise
to unlock.
Peel backing and stick the 4 rubber
feet to chassis in recesses provided.
