POWER CONNECTION
FIXED MOUNTING
RUBBER FEET ATTACHMENT
Insert Power Plug
Bottom View
of chassis
Recess
Screw
directly to flat
surface without
installing rubber feet.
Rotate 1/4-turn
clockwise to lock
Rotate 1/4-turn
counter-clockwise
to unlock
Peel backing and stick the 4 rubber
feet to chassis in recesses provided.
24 VDC POWER INPUT
Insert plug from power
supply. Rotate 1/4 turn
clockwise to lock.
MONITOR OUTPUTS
Connect to the video inputs of
1 or 2 monitors or projectors.
VIDEO INPUT
Connect the video source to the INPUT jack.
ID BIT
Set to NORM OFF position (button OUT) unless computer video
output fails to operate with the connected monitors; set switch
to ON position (button IN) if needed to activate computer video
monitor output (not typically required unless using certain laptops).
LOCAL MONITOR OUTPUT
Connect the LOCAL MONITOR output to the input
of the local computer video monitor (if used) or
to the video input of any monitor or projector.
POWER INDICATOR
Glows blue when the
product is connected to
a valid power source.
FOR BEST PICTURE QUALITY, REMOTE VIDEO MONITOR “OPTIMIZATION” FUNCTION SHOULD BE RUN, IF PROVIDED.
POWER CONNECTION
FIXED MOUNTING
RUBBER FEET ATTACHMENT
Insert Power Plug
Bottom View
of chassis
Recess
Screw
directly to flat
surface without
installing rubber feet.
Rotate 1/4-turn
clockwise to lock.
Rotate 1/4-turn
counter-clockwise
to unlock.
Peel backing and stick the 4 rubber
feet to chassis in recesses provided.
