POWER CONNECTION
FIXED MOUNTING
RUBBER FEET ATTACHMENT
Insert Power Plug
Bottom View
of chassis
Recess
Screw
directly to flat
surface without
installing rubber feet.
Rotate 1/4-turn
clockwise to lock
Rotate 1/4-turn
counter-clockwise
to unlock
Peel backing and stick the 4 rubber
feet to chassis in recesses provided.
24 VDC POWER INPUT
Insert plug from power
supply. Rotate 1/4 turn
clockwise to lock.
GAIN ADJUSTMENT
If long video cables are connected to the output
jacks, turn the GAIN control clockwise until
the picture brightness appears normal. If short
output cables are connected, or if the picture
brightness is normal, set the GAIN control fully
counter-clockwise.
EQUALIZATION ADJUSTMENT
If long video cables are connected to the output
jacks, turn the EQ control clockwise until the
picture sharpness appears normal. If short output
cables are connected, or if the picture clarity is
normal, set the EQ control fully counter-clockwise.
VIDEO INPUT
Connect a composite video
source to the INPUT jack.
The input jack terminates the
source with 75 ohms.
VIDEO OUTPUTS
Connect one, two or three
cables to feed video signals
to equipment with 75 ohm
composite video inputs.
POWER INDICATOR
Glows blue when the
product is connected to a
valid power source.
POWER CONNECTION
FIXED MOUNTING
RUBBER FEET ATTACHMENT
Insert Power Plug
Bottom View
of chassis
Recess
Screw
directly to flat
surface without
installing rubber feet.
Rotate 1/4-turn
clockwise to lock
Rotate 1/4-turn
counter-clockwise
to unlock
Peel backing and stick the 4 rubber
feet to chassis in recesses provided.
