POWER CONNECTION
FIXED MOUNTING
RUBBER FEET ATTACHMENT
Insert Power Plug
Bottom View
of chassis
Recess
Screw
directly to flat
surface without
installing rubber feet.
Rotate 1/4-turn
clockwise to lock
Rotate 1/4-turn
counter-clockwise
to unlock
Peel backing and stick the 4 rubber
feet to chassis in recesses provided.
24 V POWER INPUT
Insert plug from power
supply. Rotate 1/4 turn
clockwise to lock.
SPEAKER WIRING
Lift lever, insert wire.
Close lever to lock.
SPEAKER OUTPUTS
Connect a pair of 8 Ohm or 4 Ohm speakers to the LEFT SPKR and RIGHT SPKR terminals.
Connect the speaker “+” terminal to the amplifier “+” terminal. Connect the speaker “-”
terminal to the amplifier “-” terminal.
DO NOT GROUND ANY SPEAKER OUTPUT TERMINAL!
LINE INPUTS
Connect a line-level
source to LINE IN.
MONO/STEREO MODE
If a mono source is connected to one input, set MODE to MONO
(Button IN). If a stereo source is connected, but a mono summed
(combined left and right) amplifier output is preferred, set MODE to
MONO; for stereo operation, set MODE to STEREO (Button OUT).
OVERLOAD INDICATOR
LED flashes when the internal compression circuits are protecting the amplifier output
against overload. It is normal for this indicator to flash during high audio levels.
Reduce the input level if this indicator flashes excessively or stays on continuously.
POWER INDICATOR
Glows blue when the product is
connected to a valid power source.
OUTPUT LEVEL
Adjust for the desired sound level.
IMPEDANCE SELECTOR
Set to match the speakers
connected:
8 Ohm: Button OUT
4 Ohm: Button IN
POWER CONNECTION
FIXED MOUNTING
RUBBER FEET ATTACHMENT
Insert Power Plug
Bottom View
of chassis
Recess
Screw
directly to flat
surface without
installing rubber feet.
Rotate 1/4-turn
clockwise to lock.
Rotate 1/4-turn
counter-clockwise
to unlock.
Peel backing and stick the 4 rubber
feet to chassis in recesses provided.
