8
Basic Setup
Viewing your camera
To view your camera:
1
Connect the camera and video monitor to a power source.
NOTE:
The power adapters are labeled
"For Camera" and "For Monitor"
2
Slide the power switch to the
ON
position on the camera and video monitor. The video monitor
will automatically scan for cameras in range.
Testing your setup
It is recommended that you test your camera setup so that you get the best picture and
sound quality from your video monitor.
Test the camera and video monitor reception:
1
Place the camera and video monitor in two different rooms.
2
Have one person monitor the signal strength on the video monitor.
3
Have a second person move the camera in different locations of the room. The person holding
the video monitor can direct the person holding the camera, if the signal strength is low or
high.
Test the camera volume level:
1
Place the camera and video monitor in two different rooms. Have a person in each room.
2
Have a person with the video monitor press and hold the
TALK
button to confirm the volume
level from the camera. Adjust the volume dial on the camera as required.
3
The person holding the video monitor can determine if the camera needs to move to a
different location of the room for better sound quality.
Slide power switch
to the ON position
Camera image appears on monitor
