▶
Set humidity using the HUMI+/HUMI- button while the
SET button is pushed. The selected value is automatically
entered when the button is released.
※
The display unit shows current humidity level even when the humidifying function is stopped. When the
ventilation fan is stopped, there might be slight deviation between the displayed humidity and the actual
humidity as air is poorly circulated.
Please be sure
to re-fill the
water when “Et”
alarming on
the display
[Instructions for setting humidifying function ON/OFF]
ON : Set the humidity to 40% or higher by pushing the
HUMI+ button while the SET button is pushed.
[Default : ON]
OFF : After setting the humidity to 40% or higher by pushing
the HUMI+ button while the SET button is pushed,
pushing the HUMI- button once will stop the humidifying
function and U.OFF will appear on the display unit.
◀ ▶
Current temp and A.OFF will show on display in turn while
you set “OFF” to Ventilation fan function
please set “off” to heating in case you do not want to
activate the heating, Heating unit lifespan will be more
longer.
Humidity Setting
When releasing from the factory, temperature and humidiy was corrected to be optimized according to
international standard. If necessary, recorrection is possible, however, it isn’t desirable for users to correct
it directly. In case that correction is necessary, please contact Rcom homepage (www.Rcom.co.kr→data
center → Instruction manual categoty) or place where you purchased to inquire about it. As low price
thermometer and hygrometer easy to purchase in the open market have much deviation of estimate value,
it is desirable to use corrected thermometer and hygrometer for exclusive use.
[thermometer and hygrometer for exclusive use – See Rcom homepage]
DIGITAL INCUBATOR
13
(2) Temperature,
Humidity Setting
3.
Function Settings
North America Sales & Service www.RcomCo.com
Rcom Reptile Brooder User Manual
