R-COD 500 & R-COD 500 IR
MOUNTING
5
Mounting
Keep in mind when mounting R-COD 500 IR
•
Position the code lock so that the IR
receiver (on the right side of the front
panel) is clearly visible from the where
the IR transmitter is to be used.
•
Do not mount the code lock in a
position where direct sunlight hits the
IR receiver.
•
Do not position the code lock near light
sources such as fluorescent lamps or
low-energy lamps.
•
If access codes 5–8 are
not going to be
time-controlled, pins 3 and 4 on
terminal P1 must be connected.
Otherwise the codes will not work.
•
Contact mail services, newspaper
delivery services and others to inform
them that an IR reader is installed at
the door.
Surface mounting
(Applies to both R-COD 500 and
R-COD 500 IR.)
The drawing shows the most
commonly used measurements on the
mounting plate. All measurements are given
in millimetres.
The mounted unit measures 70 x 144 x 37 mm.
Sabotage-
kontakt
52
20
66
6,7
8,
7
125
139,
7
7
