Product Introduction
1)
As default, LED will give a confirmation blink when batteries insert.
2)
As default, STB control medium is set as STB-RF mode.
3)
As default, volume keys (“VOL+/VOL
-
/MUTE”) are in STB
-RF mode.
4)
The default TV DB code-set ID for TV IR keys is 0618.
5)
The default TV brand ID for blink-out is empty.
6)
IR learning data is empty (not learned).
7)
The RC is not paired and the BLE pairing table is empty.
Set STB Control Medium
1)
Set to IR Mode:
Press <<MENU + 1>> simultaneously for 3 seconds.
2) Set to RF Mode:
Press <<MENU + 2>> simultaneously for 3 seconds;
3) Set Volume Keys Mode
On RCU, the 3 volume keys (VOL+ / VOL- / MUTE) can work as either TV-IR keys or STB (IR/RF)
keys.
4). Set Volume Keys as TV Keys:
Press <<MENU + 3>> simultaneously for 3 seconds.
5). Set Volume Keys as STB Keys:
Press <<MENU + 4>> simultaneously for 3 seconds.
Brand-Search / Auto-Search Setup
Brand Search: <<1 + 3>>, <1
st
digit>, <2
nd
digit>, <3
rd
digit>, <4
th
digit>, <<TV-
PWR>>or<<MUTE>>, <test keys…>, <BACK>
Auto Search: <<1 + 3>>, <<TV-PWR>>|<<MUTE>>
, <test keys…>, <BACK
>
Manual Code-set ID Setup
<<2 + 6>>, <1st digit>, <2nd digit>, <3rd digit>, <4th digit>
1. Press <<2 + 6>> simultaneously for 3 seconds.
2. Enter a 4 digits code-set ID code from load list.
IR Learning
<<4 + 6>>, <learn key>
The <learn key> is the key that will get the learned IR-code assigned to it. It can only be one of
the 5 TV keys (TV-PWR / TV-INPUT / VOL+ / VOL- / MUTE).
Clear Learning Data
<<4 + 6>>, <learn key>, <learn key>
Summary of Contents for RC3544201/01BR
Page 2: ......
