Instruction Manual
Innovative DisplayWorks
RCM-77
6
Changing Electric Impulse Cooler Graphics:
7
BEVERAGE STORAGE
1
Do not overload the cooler beyond the red limitation line.
2
Leave adequate space between beverage cans to allow air circulation.
3
This cooler is primarily for storing beverage cans and plastic bottles.
Avoid putting glass containers in the cooler.
4
All beverage products should be properly sealed to avoid leaking into the cooler.
MAINTENANCE
Accessing Cooler Components:
2
Remove the baffler from cooler.
3
Using a Phillips screwdriver,
unscrew the (4) screws at the base
of the cooler.
1
Remove the basket from the inside of the cooler.
5
Lay the body of the cooler on its side to access
components.
6
To re-assemble the cooler align the
notch at base of the body with the
cooler cord. Then reverse steps 1-5.
4
The body of the cooler can now be worked free from the frame.
2
Wedge the graphic under the plastic frame of the cooler.
3
Remove the covering on the double-
stick tape to adhere the graphic in
place.
1
Place graphic around barrel, making sure to align the grill holes in the graphic with the grill
holes on the cooler to allow proper ventilation for the cooler.
