1. Set Time
With this feature, you can setup current time into the RCL transmitter.
z
At the “Set Time” menu, set the hour using “No.” key and then press “ENTER” key.
z
Then set the minutes using “No.” key and press “ENTER” key.
z
Press “No.1” key to select “AM”, ”No.2” is to select “PM”. After selection of it, then
press “ENTER” key
z
After the correct time is set, press the “ENTER”
2.
Set Alerts
With this feature, you can have the option of changing the way your pagers alert.
To change the alert mode of your pagers, follow these instructions:
z
Remove all the pagers from the charger base or unplug the power supply that is
connected to the charger base.
z
At the “Set Alerts” menu, press the “ENTER” key
z
If the “Change?” menu appears, press “No.1” key to select “Yes”, “No.2” key is to
select “No”, then press “ENTER” key ( press “CANCEL” key, and return to the main
menu )
z
Select one of 1~6 Alert modes, then press “ENTER” key.
1) Vibration 2) Beef 3) Flash 4) Vib/Flash 5) Beep/Flash 6) Beep/Vib/Flash
( Use the “F1” key to scroll through these 6 alert modes )
z
The pagers will now respond with your new selected alert mode.
z
Return all the pagers to the charger base or plug the power supply. The pagers
are ready to receive the page with its new alert mode.
3.
Set Alert Time
With this feature, you can set the alert time, how long the pager alerts, when the pager
receive the signal from the transmitter.
To change the Alert time mode of your pagers, follow these instructions :
z
Remove all the pagers from the charger base or unplug the power supply that is
connected to the charger base.
z
At the “Set Alerts Time” menu, press “Enter” key.
z
If the “Change?” menu appears, press “No.1” key to select “Yes” or “No.2” key to
select “No”. Then press “ENTER” key. ( Press “CANCEL” key to exit, and return to
the main menu )
