6. Connect the ignition wire from ignition module to the spark plug.
7. Install the muffler onto the engine. Be sure to use threadlocker and that the ignition
wire does not contact the muffler.
8. Cut all necessary clearance, carburetor adjustment, cooling, and exhaust holes in the
cowl.
9. Make sure the cowl is secured to the airplane and that the knurled thrust washer
protrudes from the cowl by at least 3.2mm [1/8”].
When starting the engine for the
fi
rst
time and during break-in, it’s recommended that you run the engine without the cowling.