51
TECHNICAL SPECIFICATIONS
Amplifier specifications
Amplifier Class:
D
Output power (EIAJ 8:32 all channels driven):
4 x 4000 W @ 2.7 ohm
4 x 2600 W @ 4 ohm
4 x 1400 W @ 8 ohm
Frequency Response (-3dB):
20 Hz ÷ 23000 Hz
SNR (unweighted)
Analog inputs:
111 dB
Digital inputs:
115 dB
Crosstalk:
<70 dB
THD+N (20 Hz ÷ 20000 Hz, 1000 W @ 4ohm):
<0.2 %
Gain (linear mode @ 0 dB):
32 dB
Damping factor (@ 4 ohm, 20 Hz ÷ 1500 Hz):
> 95
Max burst length (@ 50 Hz, CF = 7 dB, 4 ohm, 1% THD+N):
200 ms
Input section
Total number of inputs:
8 / 16 (XPS 16KD)
Line inputs:
4
Line connectors:
XLR
Input impedance:
19 kohm (unbalanced)
Maximum input level:
+24 dBU
Digital inputs:
4 / 12 (XPS 16KD)
Digital connectors:
Ethercon, XLR
Digital type:
4 AES/EBU, 8 DANTE (XPS 16KD)
General Purpose Inputs (GPI):
2
Programmable GPI:
Yes
Photo-coupled GPI:
Yes
Output section
Signal output number:
4
Signal output connectors:
XLR
Power output lines:
4
Power output connectors:
Speakon
General Purpose Outputs (GPO):
3
Programmable GPO:
Yes
Processing
Digital Signal Processing (DSP):
2 SHARC, 40-bit floating point, 96 kHz
2 ADAU 1442, 32-bit fixed point, 96 kHz
EQ Filters:
Peaking, HI/LO-shelving, HI-pass, LO-pass
Advanced algorithms:
FiRPHASE technology, BASS shaper, air compensation, mid-
low correction, driver excursion control, dynamic PEQ, multi-
band compressor, pilot tone & AES detection, backup
recovery strategy, impedance load measurement
Compressors:
RMS limiter, dynamic compressor, power limiter, thermal
compressor
Delay:
0 ÷ 4000 ms (each channel)
Summary of Contents for XPS 16K
