RCF RC 2946 User Manual Download Page 4

4

ENGLISH

SAFETY 

PRECAUTIONS

IMPORTANT NOTES

IMPORTANT NOTES

Before connecting and using this product, please read this instruction manual 
carefully and keep it on hand for future reference. The manual is to be 
considered an integral part of this product and must accompany it when it 
changes ownership as a reference for correct installation and use as well as 
for the safety precautions.
RCF S.p.A. will not assume any responsibility for the incorrect installation and 
/ or use of this product.

WARNING: 

To prevent the risk of fire or electric shock, never expose this 

remote control  to rain or humidity.

SAFETY PRECAUTIONS
1. 

All the precautions, in particular the safety ones, must be read with special 

attention, as they provide important information. 
 

2. 

RC 2946 remote control is a ZM 2000 system component. Ensure the ZM 

2124 / ZM 2100 main unit is turned off before installing it. 
 

3.

 Make sure all connections have been made correctly. 

 

4. 

Make sure that no objects or liquids can get into this product, as this may 

cause a short circuit. 
 

5.

 Never attempt to carry out any operations, modifications or repairs. 

Contact your authorized service centre or qualified personnel should any of 
the following occur: 
-  The remote control does not operate (or works in an anomalous way). 
-  Objects or liquids have got into the remote control. 
-  The remote control has been damaged (due to heavy impacts or fire). 
 

6.

 Should any part of the remote control emit any strange odour or smoke, 

remove it from the line after having immediately switched the system off. 
 

7. 

Do not connect this product to any equipment or accessories not foreseen. 

Check the suitability of the support surface (wall, structure, etc., which the 
product is anchored to) and the components used for attachment that must 
guarantee the security of the system / installation over time, also considering, 
for example, the mechanical vibrations normally generated by loudspeakers. 
 

8. RCF S.p.A.

 strongly recommends this product is only installed by 

professional qualified installers (or specialised firms), who can ensure a 
correct installation and certify it according to the regulations in force. The 
entire audio system must comply with the current standards and regulations 
regarding electrical systems. 
 

Summary of Contents for RC 2946





















Reviews: