19
ENGLISH
17. BAL
- BALANCE - Sets the Left/Right balance of the STEREO LINE signals or pans the MIC
signal.
18. PEAK
- The PEAK LED Indicates that the channel signal is approaching its maximum level.
If the PEAK LED remains lit, reduce the channel GAIN control setting until the LED flashes to
signal peaks. When the PFL button is activated the PEAK LED stays fully illuminated and the signal
level is shown on the MAIN MIX bargraph meters and can be heard via the headphone output.
Note: On STEREO LINE channels the input level is adjusted using the Level switch. If the PEAK LED
remains lit it may be necessary to reduce the output volume of the equipment connected to the
channel.
19. PFL
- Depressing the PFL (Pre-Fade Listen) button allows the selected channel (or channels)
to be monitored via the headphone output. The level is also shown on the MAIN MIX bargraph
meters.
20. FADER
- The FADER adjusts the level from the channel to the main output. The FADER acts as
a volume control for each channel. They join all the various sounds together creating a blend or
‘MIX’ of sounds. The Faders make small adjustments easy as well as giving a visual representation
of sound levels.
In use, aim to set the FADER at the 0dB position. It can then be raised or lowered to adjust the
sound (MIX).
11
12
15
16
17
18
19
20
14
13
HI
12K
LO
45Hz
Summary of Contents for MX 1822
Page 1: ... ...
Page 27: ...27 APPENDICE APPENDIX BLOCK DIAGRAM MX 1822 ...
Page 32: ... 10307049 A ...
