RCF MR44T, User Manual, Page: 12 / 16

1
ITALIANO
INSTALLATION INSTRUCTIONS
You are recommended to install the speaker safety, checking that the fixing surface is
resistant and solid enough to support the weight of the speaker, so as to prevent the risk of
it falling that could put the safety of persons and structures in jeopardy.
The accessory is installed as follows (see the figure):
Using suitable plugs and screws
(not provided)
, fix the support at the chosen point on the wall.
The plugs
to be used must be chosen carefully depending on the type of wall
(plasterboard, hollow bricks, solid
bricks, concrete, matchboard panelling, etc.).
Attach the bracket to the
wall perpendicularly,
using suitable screws and
accessories (not provided)
90°
The Adapter to be fixed on
cabinet allows you both vertical
and horizontal slide-in, so that
the cabinet can be rotated 90° for
horizontal tilting.
SCREW TO FIX THE SPEAKER CABINET
Round-head screw
SCREW TO FIX THE
SPEAKER CABINET
Flat-head screw
Pls put rubber washer
between ball and joint
Use safety screws on both
sides