RCF M 20X, Quick Start Manual

Page: 8 / 24

IT
ALIANO
ENGLISH
8
BACK PANEL
10. LINE
INPUTS
1. MIC
INPUTS
9. AES
DIGITAL
OUTPUT
8. USB
AUDIO
PORT
7. LAN
PORT
6. MAIN
OUTPUTS
5. POWER
4. MIX
OUTPUTS
(TRS)
3. MIX
OUTPUTS
(XLR)
2. MIC/LINE
INPUTS
1. MIC INPUTS 1-8 FEMALE XLR
Connect your Microphones to these remotely controlled 60dB gain-range inputs. Use balanced XLR cables to obtain best
performance from your microphones.
2. MIC/LINE INPUTS 9-16 COMBO
Input 9 to 16 provide Mic inputs on the XLR connection and Line inputs on the TRS jack connection.
3. MIX OUTPUTS 1-8 MALE XLR
Connect to these +24dBu balanced XLR outputs your stage monitors or external effects.
4. MIX OUTPUTS 9-10 TRS
Connect to these +24dBu balanced TRS outputs your stage monitors or external effects.
5. POWER
Use this switch to turn On and Off your M 20X device. Connect to the VDE inlet the provided power cord.
6. MAIN OUTPUT
Connect your active speaker or your amplifier, in case of passive speakers, to these +24dBu balanced Output.
7. LAN PORT
The mixer can be remotely controlled via LAN, and an external Wi-Fi Access Point can be connected to the LAN port to
communicate with remote control apps running on iOS and Android.
8. USB AUDIO PORT
A 24-track, 24-bit, 48-kHz audio interface is available and allows access to all inputs and several internal signal nodes.
Extensive routing options allow both offline soundcheck and host-based effects processing.
9. AES DIGITAL OUTPUT
Connect here any AES device. Each of the audio output paths is routable to the AES port.
10. LINE INPUTS 17-18 TRS
Connect here your line level sources like keyboard, external audio device or other small analog consoles used for submix.