RCF spa
M 20X Digital Mixer Reference Guide
31
REVERB
The M Series provides two simultaneous full Digital Reverbs available on Send FX1 and Send FX2. Digital Reverb is a
very intuitive and smooth sounding processor and represents an essential ingredient of the final mix. Great care has
been taken to provide the highest quality algorithms and presets.
Based on 12 algorithms, it allows to easily find the perfect reverberation for every kind of application in a few clicks. The
algorithms are been designed and tailored to focus immediately the sound you are looking for and then fine tune it with
the essential parameters available through the five pots.
The algorithms are also available in some cases into two variations (Bright/Warm or Digital/Vintage) to further help in
selecting the proper starting point.
Four different reverb types are available:
TYPE
VARIATIONS
Hall
usually perfect for smooth and deep reverberations large/medium
warm/bright
Room
the algorithm to start with if you are looking for hi
impact reverberations
large/medium
warm/bright
Plate
classic “all purpose” algorithm with unique character digital/vintage
Ambience
the first choice if you are looking for something to
expand the stereo field or to somehow enhance the
sounds
model 1, model 2
You can create your own configurations for Hall and Room by modifying the following parameters:
Predelay (delay before reverb)
ER (amount of primary reflections)
Decay (time decay)
Spaceness (percentage of spatialization)
Damping (percentage of absorption of the higher frequencies)
