4
ENGLISH
IMPORTANT NOTES
Before connecting and using this product, please read this instruction manual carefully
and keep it on hand for future reference. This manual is to be considered an integral part
of this product and must accompany it when it changes ownership as a reference for
correct installation and use as well as for the safety precautions.
RCF S.p.A. will not assume any responsibility for the incorrect installation and / or use of
this product.
SAFETY AND OPERATING PRECAUTIONS
1.
All the precautions, in particular the safety ones, must be read with special attention,
as they provide important information.
2.
Speaker lines (amplifier outputs) can have a sufficiently high voltage (i.e. 100-70 V) to
involve a risk of electrocution: never install or connect this speaker when the line is alive.
3.
Make sure all connections have been made correctly and the speaker input voltage is
suitable for the amplifier output.
4.
Protect speaker lines from damage. Make sure they are positioned in a way that they
cannot be stepped on or crushed by objects.
5.
Make sure that no objects or liquids can get into this product, as this may cause a
short circuit.
6.
Never attempt to carry out any operations, modifications or repairs that are not
expressly described in this manual.
Contact your authorized service centre or qualified personnel should any of the following
occur:
-
The speaker does not function (or works in an anomalous way).
-
Its cable has been damaged.
-
Objects or liquids have got into the unit.
-
The speaker has been damaged due to heavy impacts or fire.
7.
Should the speaker emit any strange odours or smoke, remove it from the line after
having immediately switched the amplifier off.
8.
Do not connect this product to any equipment or accessories not foreseen.
For suspended installation, only use the dedicated anchoring points and do not try to
hang this speaker by using elements that are unsuitable or not specific for this purpose.
Also check the suitability of the support surface to which the product is anchored (wall,
ceiling, structure, etc.) and the components used for attachment (screw anchors, screws,
brackets not supplied by RCF etc.), which must guarantee the security of the system /
installation over time, also considering, for example, the mechanical vibrations normally
generated by transducers.
9. RCF S.p.A.
strongly recommends this product is only installed by professional
qualified installers (or specialised firms) who can ensure a correct installation and certify
it according to the regulations in force.
The entire audio system must comply with the current standards and regulations
regarding electrical systems.
10.
Mechanical and electrical factors need to be considered when installing a
professional audio system (in addition to those which are strictly acoustic, such as sound
pressure, angles of coverage, frequency response, etc.).
IMPORTANT NOTES
SAFETY AND OPERATING PRECAUTIONS
