RCF EVOX 5 Owner'S Manual Download Page 2

4

ENGLISH

IMPORTANT

Before connecting and using this product, please read this instruction manual carefully and 
keep it on hand for future reference.
The manual is to be considered an integral part of this product and must accompany it when 
it changes ownership as a reference for correct installation and use as well as for the safety 
precautions.
RCF S.p.A. will not assume any responsibility for the incorrect installation and / or use of this 
product.

WARNING: 

To prevent the risk of fire or electric shock, never expose this product to rain or 

humidity.

CAUTION

: to prevent electric shock hazard, do not connect to mains power supply while 

grille is removed

SAFETY PRECAUTIONS
1.

 All the precautions, in particular the safety ones, must be read with special attention, as 

they provide important information.

2.  POWER SUPPLY FROM MAINS

 

-

Appliance coupler or PowerCon Connector® is used to disconnect device from MAIN 
power. This device shall remain readily accessible after the installation

 

-

The mains voltage is sufficiently high to involve a risk of electrocution: never install or 
connect this product when its power cord is plugged in.

 

-

Before powering up, make sure that all the connections have been made correctly and the 
voltage of your mains corresponds to the voltage shown on the rating plate on the unit, if 
not, please contact your RCF dealer.

 

-

The metallic parts of the unit are earthed by means of the power cord.This is a Class I 
device and for its use it must be connected to a grounded power source.

 

-

Protect the power cord from damage. Make sure it is positioned in a way that it cannot be 
stepped on or crushed by objects.

 

-

To prevent the risk of electric shock, never open this product: there are no parts inside that 
the user needs to access.

3.

  Make sure that no objects or liquids can get into this product, as this may cause a short 

circuit. This apparatus shall not be exposed to dripping or splashing. No objects filled with 
liquid (such as vases) and no naked sources (such as lit candles) should be placed on this 
apparatus.

4.

 Never attempt to carry out any operations, modifications or repairs that are not expressly 

described in this manual. 
Contact your authorized service centre or qualified personnel should any of the following 
occur:

 - The product does not function (or functions in an anomalous way).
 - The power cord has been damaged.
 - Objects or liquids are inside the product.
 - The product has been subject to a heavy impact.

5. 

If this product is not used for a long period, disconnect its power cord.

6. 

If this product begins emitting any strange odours or smoke, switch it off immediately and 

disconnect its power cord.

7.

 Do not connect this product to any equipment or accessories not foreseen.

Do not try to hang this product by using elements that are unsuitable or not specific for this 
purpose.

IMPORTANT

WARNING

SAFETY PRECAUTIONS

CAUTION

Summary of Contents for EVOX 5













Reviews: