5
ENGLISH
8. RCF S.p.A.
strongly recommends this product is only installed by professional qualified
installers (or specialised firms) who can ensure correct installation and certify it according to
the regulations in force.
The entire audio system must comply with the current standards and regulations regarding
electrical systems.
9.
Supports and trolleys
The equipment should be only used on trolleys or supports, where necessary, that are
recommended by the manufacturer. The equipment / support / trolley assembly must be
moved with extreme caution.
Sudden stops, excessive pushing force and uneven floors may cause the assembly to overturn.
10.
Hearing loss
Exposure to high sound levels can cause permanent hearing loss. The acoustic pressure level
that leads to hearing loss is different from person to person and depends on the duration
of exposure. To prevent potentially dangerous exposure to high levels of acoustic pressure,
anyone who is exposed to these levels should use adequate protection devices.
When a transducer capable of producing high sound levels is being used, it is therefore
necessary to wear ear plugs or protective earphones. See the manual technical specifications
to know the maximum sound pressure level.
11.
Situate this product far from any heat sources and always ensure adequate air circulation
around it.
12.
Do not overload this product for a long time.
13.
Never force the control elements (keys, knobs, etc. ).
14.
Do not use solvents, alcohol, benzene or other volatile substances for cleaning the
external parts of this product.
Use a dry cloth.
15.
Do not put microphones close and in front of speakers, in order to avoid audio feedback
(‘Larsen effect’).
To prevent the occurrence of noise on microphone / line signal cables, use screened cables
only and avoid putting them close to:
-
Equipment that produces high-intensity electromagnetic fields.
-
Mains cables.
-
Loudspeaker lines.
The equipments considered in this manual can be used in electromagnetic
environment E1 to E3 as specified on EN 55103-1/2: 2009.
NOTES ABOUT AUDIO SIGNAL CABLES
