9
ENGLISH
NOTES ABOUT CONSTANT VOLTAGE SYSTEMS
-
The loudspeaker input voltage (Vd) shall correspond to the amplifier output
voltage (Va).
-
The sum of nominal power values (Pd x n) of all loudspeakers connected to
the line shall not exceed the amplifier power (Pa).
-
Make sure all loudspeakers are connected in phase to ensure a correct
sound reproduction.
-
Always use cables having wires with an adequate cross-section, considering
the cable length and the total loudspeaker power.
-
Loudspeaker lines must be kept separated from mains cable, microphone
cables or others, in order to avoid inductive phenomena may cause hum
or noises.
-
Use loudspeaker cables having twisted wires to reduce hum caused by
inductive effects due to coupling with electromagnetic fields.
AMPLIFIER
Pa = Amplifier power
Pd = Speaker power
n = Number of speakers
Vd = Speaker input voltage
Va = Amplifier output voltage
Pa > Pd x n
Va
Vd=Va
Vd=Va
Vd=Va