RCF C 3106-126, Owner'S Manual

Page: 7 / 32

7
ENGLISH
Loudspeakers are to be install by qualified personnel, respecting all safety standards.
Loudspeakers are to be installed securely.
Make sure the support structure (walls / ceilings) has the necessary mechanical
characteristics for the loudspeaker weight, without the risk of a fall that could damage
things or cause an injury.
Use attachments elements suitable for walls / ceilings (e.g. screw anchors for bricks, screw
anchors for concrete, etc.).
a) HORIZONTAL MOUNTING WITH U BRACKET
Necessary optional accessory:
- AC NC06 H-BR (for the C 3106-96 and C 3106-126 models)
- AC NC08 H-BR (for the C 3108-96 and C 3108-126 models)
- AC NC10 H-BR (for the C 3110-96 and C 3110-126 models).
Fix the U bracket to the wall / ceiling through at least 4 lateral wall plugs (max. M8) plus
a central one (max. M10).
Mount the U bracket to the loudspeaker by tightening the two M10x35 bolts into the two
central holes of the multiplates, as shown in the figure below.
As an alternative, it is possible to install the loudspeaker a bit less prominent, thanks to the
U bracket inner holes. Before tightening the two M10 bolts, adjust the loudspeaker vertical
tilt and then fix it through two M5x20 bolts into one of the 7 small holes of the U bracket.
N
ote
:
do
Not
tilt the loudspeaker upwards
!
i
Nstead of simple
m10
bolts
,
it is possible to use the iNcluded kNobs
(
haviNg
m10
bolts
).
INSTALLATION