18
USE
Before using the paging microphone, choose to enable / disable the chime by
pushing the CHIME button
1
.
SELECTIVE OR GENERAL CALLS
1.
Make sure the line has not been already engaged
(zone LEDs lit yellow or red
10b
12b
24
).
2. Select one or more zones by pushing their respective buttons of either
the BM 3804 paging microphone
9
11
or its BE 3806 keyboards (if
present)
22
.
The corresponding LEDs
10b
12a
/
23
turn green.
A further press of a button unchecks its respective zone.
To make a general call to one only or more MX 3250 / MX 3500 main
units, push one or more GEN CALL buttons
25
of the respective BE 3806
keyboards (all LEDs
26
light up).
Push the BM 3804 GEN CALL button
5
(instead) to make a system
general call (the corresponding LED
6
lights up).
3. Press and hold the PTT button
3
to turn the microphone on
(the PTT LED
4
lights up).
4. After the end of the announcement, release the PTT button PTT
3
.
T
he
emerGency
funcTion
of
The
bm 3804
PaGinG
microPhone
musT
be
enabled
(
inTernal
diP
-
swiTch
no
.4
seT
To
on).
1. Select each single zone or push the GEN CALL button
5
for all system
zones (or one or more GEN CALL
25
buttons of the BE 3806 keyboards).
2. Select either the evacuation (by pushing the EVAC button
13
) or the alert
status (ALERT button
7
).
3. Lift the guard and push the emergency red button
15
, after a few seconds
the selected message playback starts (all zone LEDs are lit red
10b
12b 24
).
4. To stop the message playback, deactivate (following this order):
a) All zone buttons or the GEN CALL buttons previously activated.
b) Then either the EVAC or ALERT button.
c) Finally, release the emergency red button and close its guard.
ENGLISH
ACTIVATION OF THE EVACUATION / ALERT STATUS
AND PLAYBACK OF THE RESPECTIVE MESSAGE
Summary of Contents for BE 3806
Page 2: ......
