REAR PANEL FEATURES AND CONTROLS
JACK/FEMALE XLR INPUTS (BAL/UNBAL)
The system accept jack or XLR input connectors.
LIMITER LED
The amplifier has a built in limiter circuit to prevent clipping
of the amplifiers or overdriving the transducers. When the
soft clipping circuit is active the LED blinks orange. It is
okay if the limit LED blinks occasionally. If the LED blinks
frequently or lights continuously, turn down the signal level.
SIGNAL LED
The signal indicator lights green if there is signal present on
the main XLR input
STATUS LED
The status indicator flash if the temperature protection is
active.
MALE XLR SIGNAL OUTPUT
The output XLR connector provides a loop trough for
speakers daisy chaining.
VOLUME CONTROL
Adjust the amplifier volume.
FLAT/BOOST SWITCH
Set the flat or boost equalization. “Boost” equalization is a
loudness recommended for background music applications,
when the system plays at a low level. For all other
applications “Flat” equalisation is recommended.
INPUT SENSITIVITY SWITCH.
Position the switch in LINE
to use a line level source (0 dB) or MIC to use a
microphone source.
IEC AC SOCKET
The IEC AC socket connect the power cord to the socket.
FUSE CARRIER.
Mains fuse housing.
POWER MAIN SWITCH
The power switch turns the AC power ON and OFF.
english
1
2
3
4
5
6
7
8
9
10
11
4
11
1
1
6
2
3
4
5
7
8
9
10
