AM 2160 - AM 2320
INTEGRATED AMPLIFIER
DESCRIPTION
AM 2160 and AM 2320 are a mixer-amplifier with 4 mic-line audio inputs on
removable connectors (the first input also has an XLR socket) and an two aux
input for an additional external music source.
The amplifier nominal power is 160 W for the AM 2160 and 320 W for the
AM 2320, available on either a low impedance output (min. 4
Ω
) or 100 – 70
V constant voltage output (for loudspeakers having 100 – 70 V transformers).
Input 1 has a signal detection circuit (‘VOX’) providing automatic priority
operation.
All inputs 1, 2, 3 and 4 can access the priority through an external command
(connected to the removable connector). Inputs 2 and 3 also have an RJ 45
socket for quick connection of an RCF BM 3001 paging microphone (through
CAT5 cable).
Aux outputs are available to send the internal / external music source signals
to additional amplifiers, mixers, phone systems (‘music on hold’ function), etc.
The 4 mic.-line inputs have a common ‘presence’ control and separate high-
pass filters that are useful for improving speech intelligibility.
The two AUX INPUT have separate tone and gain controls.
Front panel LED’s indicate the device state (ON, PROT), the priority activation
(PRIOR) and the signal level (SIG/PK).
MAIN FEATURES
• Full digital technology amplifier 160W RMS, 100V-70V and 4 Ohm outputs
• 4 universal inputs with phantom facility, Presence Control and per-channel High-Pass
filters
• RJ45 connectors on input 2 and 3 for connection to BM3001 microphone
• Screw terminal connections, additional XLR and RJ45 input connections available
• Configurable Priority settings, VOX facility on input 1
• Selectable two aux input for music source with volume and tone controls
• Music On Hold and PRE outputs
• Microprocessor controlled
• Digital Chime and Siren built-in generator
• Continuous Chime or Siren activation through dry contact
• Status / Priority / Audio Level LED indications
MAIN APPLICATIONS
• Restaurants
• Boutique
• Pub
• Beauty Centre
• Market
• Hotels
• Office building
• Medical centres
INSTALLATION NOTES
The AM 2160 and AM 2320 are supply with 4 footpad that allow to place the
unit on a table.
To ensure proper heat dissipation, install the player while leaving clearances
of 0,1 m between the player and wall or other components.
In case the AM 2160 and AM 2320 will be assemble in a cabinet use the
ear rack brackets included. Air ventilation is horizontally (looking at the front
panel: from left to right), so it is necessary to keep open the lateral sides. The
power amplifiers can be stacked without spaces or ventilation panels
ACCESSORIES (included)
• 4 Male Audio Input connector 4 pole
• 1 Male Command Input connector 2 pole
• 1 Male Relay Input connector 3 pole
• 1 Male output connector 4 pole
• Safety protection cover for 100 V output connector
• Rack ears with screw
• AC Power cord
• User’s Guide
• Quick Start Instruction
• Warranty Card
ACCESSORIES (not included)
• BM 3001 microphone console with CAT5 cable and
RJ 45 connector (code 143 22 008 Optional)
CERTIFICATIONS AND APPROVALS
• CE comply with European Community 2006/95/CE LVD Directive and
2004/108/CE EMC
• Directive Immunity according to IEC EN 55013+A1+A2, IEC EN
55020+A2+EC, EN 61000-3-2, EN 61000-3-3+A1
• Safety according to IEC EN 60065:2002
