ENGLISH
IMPORTANT NOTES
Before using this product, please read this instruction manual carefully and keep it
on hand for future reference. This manual is to be considered an integral part of this
product and must accompany it when it changes ownership as a reference for correct
installation and use as well as for the safety precautions.
RCF S.p.A. will not assume any responsibility for the incorrect installation and / or use
of this product.
SAFETY PRECAUTIONS
1.
All the precautions, in particular the safety ones, must be read with special attention,
as they provide important information.
2.
This adapter cannot be loaded in a one-sided manner.
3.
Put the adapter only on a suitable floor stand having a rod diameter of 35 mm and
supporting a load of (at least) 50 kg .
4.
Make sure the used floor stand is on a flat and solid-compact surface only.
As soon as the used floor stand is placed and adjusted, tighten thoroughly the
clamping screws and use the safety pin (if available).
After placing the loudspeaker on the adapter, check its stability: when tilted towards
every direction at a 10 degree angle (with respect to the surface), the loudspeaker
should not overturn.
If necessary, reduce the loudspeaker height and extend the floor stand base.
5.
Two technically and physically suitable persons are recommended to adjust the
loudspeaker height.
6.
Ensure the use of suitable loudspeaker accessories (e.g. the flange adapter shall
be the right size and a quality product).
7.
Do not allow unauthorized people to be close to the floor stand.
8.
The moving of the loaded floor stand can result in damaging the legs.
9.
Do not exceed the maximum central load: 50 kg .
10.
Never loosen the clamping screw in an uncontrolled manner.
11.
Careful handling is required, since adjustments may lead to possible pinching.
12.
Do not use solvents, alcohol, benzene or other volatile substances for cleaning the
external parts of this product; simply use a damp cloth.
