BUTTONHOLE SEWING
a
a
1
2
This machine can sew 2 type buttonholes.
1.Mark position and lenght of buttonhole on
fabric.
2.Set button on the base.
* If button does not fit on the base, adjust
slide on base to diameter of button plus
thickness of button.
a= Length of thickness
3.Pass upper thread through the hole of
buttonhole foot and bring upper and
bobbin threads to the left.
4.Position fabric under presser foot so that
the center line mark is in the center of the
buttonhole foot.
Lower the foot.
5.Reset presser bar lifter up & down for BH
presser foot touch the buttonhole lever. Now,
start switch show green light.
Note:Machine will not start to sew if buttonhole
lever is not lowered properly or buttonhole
foot is not positioned correctly.
6.Hold upper thread lightly and start the machine.
31
3
5
4
6
-26-
