RCE Solutions Colco Thunderbird Concept II, User Manual

Page: 57 / 58

55 PP Joy
© <2005> ... RCE
Select the Serial Port, and Select THEN HUA 5 BYTE PROTOCOL at the Serial Protocol Drop down.
Note the Message "Waiting for Stream Init..."
Plug the Connector into your Radio TX. Do not Switch the Radio ON.
NOTE: The Message will change to Read Serial Stream... if the connection is successful. If not,
remove the Cable and try a Different COM port.
Minimize the PPJOYCOM Window and Start FMS. (NOTE: This window must be active to allow the
Radio TX to work with FMS.)
Once in FMS, go to Control Panel, and Select Joystick Interface, and Click on Mapping/Calibration.
The Default setup should look like the Image Below