INSTRUCTIONS FOR THE USER
33
OPERATION AND USE
1. Before washing make sure that:
•
the wall-mounted on/off switch is switched on;
•
the water tap is open;
•
water is present in the distribution network;
•
the pump protection filters are installed in their respective positions;
•
the overflow in inserted;
•
all rotating parts are free;
•
the rinse aid dispenser is full;
•
make sure that dishware is in good conditions as it may cause cleaning
difficulty and haven bacteria.
2. Press the "Q1 on/off" button ("H14" ON) to enable the automatic wash
tank filling and the consequent triggering of the heating element.
Wait that the temperatures are 55°C for washing
"T3" and 80-85°C
for rinsing
"T2" (the lamp"H2" ON).
3. Pour about 30 gr. of detergent directly into the tank, paying attention to
distribute it uniformly on the filters, the quantity being according to
supplier's instructions. Add 15 gr. every 4 cycles to achieve a concentration
of 1,5 gr./lt. In order to respect our environment, use only the correct amount
of detergent.
When using chlorinated detergent, it is suggested to use an automatic
dispenser; otherwise, brownish spots might appear on the surfaces due to
chlorine reactions. Detergent should always be placed near the pump filter.
4. Then, introduce the glasses or the cups to wash, after having removed the
solid waste and having placed them into the proper racks. The cups and the
glasses should be turned upside down, while the cutlery should be put
vertically into the proper container, and the same applies to dishware.