manualshive.com logo in svg

RCBS Dillon Conversion Kit, Product Instructions

The RCBS Dillon Conversion Kit is a high-quality reloading accessory that allows you to seamlessly convert your reloading press. Unlock the full potential of your equipment with this user-friendly kit. Enhance your reloading experience by accessing the free product manual, available for download at manualshive.com, featuring detailed product instructions.

Share
Download
background image

UNPACKING

Refer to the list below to identify parts as you unpack your new Rifle Bullet Feeder – Dillon Conversion Kit. 

 

Parts Bag #1

1/4-20 x 1/2” Long BHCS (4)

1/4-20 x 3” Long BHCS (2)

8-32 x 1/2” Long BHCS (2)

8-32 Hex Nut, Zinc Plated (1)

10-32 x 1-1/4” SHCS (1)

 

Note: Keep the packaging foam inside the Bullet Feeder 

Bowl Assembly throughout the installation process.

 

Parts Bag #2

Dillon PM Bracket

Dillon Adjustment Bracket

Dillon Clamp

Dillon Clamp Anchor

Cam

 

Upper T

ube

Lower T

ube

Bag #1

Bag #2

Tube

Coupling

4

Summary of Contents for Dillon Conversion Kit













Reviews:

No comments

Related manuals for Dillon Conversion Kit

Herd GT-77 Instructions For Assembly, Operation And Maintenance preview
GT-77
Brand: Herd Pages: 8
gala gar D-20 C Technical Instruction Manual preview
D-20 C
Brand: gala gar Pages: 32

Brands by name

Popular brands

Load more brands